Seven precautions for ultra high pressure hose

Seven precautions for using ultra-high pressure hose:1. The ultra-high pressure hose and hose assembly can only be used to transport the designed materials, otherwise it will reduce the service life or failure.2. The ultra-high pressure hose and hose assembly can only be used within its bearing range and should not be used under the pressure exceeding the design working pressure.3. The medium temperature transmitted by the ultra-high pressure hose and hose assembly shall not exceed - 40 ℃ - + 120 ℃, otherwise its service life will be shortened.4. The ultra-high pressure hose and hose assembly should be kept clean and cleaned to prevent foreign matters from entering and damaging the equipment5. The ultra-high pressure hose and hose assembly should not be used when it is less than the minimum bending radius of the hose. Avoid bending or bending near the pipe joint, otherwise it will hinder the hydraulic transmission and conveying of materials or damage the hose assembly.6. The ultra-high pressure hose and hose assembly shall be handled carefully in transportation. It is not allowed to drag on sharp or rough ground, nor bend or flatten the hose.7. Ultra high pressure hose and hose assembly cannot be used under torsion.